MSC Stockholm AB

MSC Stockholm AB The company mainly sells starter kits for so-called MSC - a completely new approach for castings. M

Two new casting using the furnace from ToAuto (https://www.toautotool.com/). This time I went as high as to 1100 Celsius...
14/11/2021

Two new casting using the furnace from ToAuto (https://www.toautotool.com/). This time I went as high as to 1100 Celsius, and I got a good result 😃

08/11/2021

Probably the best MSC casting of a ring I have done so far. The 'beard' between the segments is as good as invisible. Much thanks to the furnace from, ToAuto (https://www.toautotool.com/) where you conviently can preset the temperature when to pour the melt into the ingot of the mold. I chose 1060 Celsius, and I had some time to pour before the silver solidifies.

MSC casting of a shell, that I borrowed from Fernando Fabris, thanks! It's stering silver and the necklace is 'knitted' ...
31/10/2021

MSC casting of a shell, that I borrowed from Fernando Fabris, thanks! It's stering silver and the necklace is 'knitted' silverwire, with a leather string inside

06/10/2021

Ännu en animering, gjord med CAD programmet Fusion360
Denna gång visas hur man kan göra en gjutform av en ring med dekorationer längs utsidan.
Nu är det möjligt att förbeställa MSC kit från en förbättrad version (2.0) som beräknas komma i månadsskiftet oktober- november. Även enskilda flaskset och ett uppgraderingskit finns att förbeställa!
Kolla på:
https://www.mscstockholm.com/hem/webshop.html
För er som inte vet vad MSC metoden går ut på, kolla gärna på
https://www.mscstockholm.com/hem/mscgrunderna/

06/10/2021

Yet another animation using the CAD program Fusion360.
This animation shows how you can make a mold of a ring with decorations along the outside.

It is now possible to pre-order MSC kits from an improved version (2.0) which is expected to arrive at the turn of the month October-November. Individual bottle sets and an upgrade kit are also available to pre-order!
Have a look at:
https://www.mscstockholm.com/home-en/webshop.html
For those of you who do not know what the MSC method is about, feel free to check it out:
https://www.mscstockholm.com/home-en/msc-principles/

It is now possible to pre-order MSC kits from an improved version (2.0) which is expected to arrive at the turn of the m...
03/10/2021

It is now possible to pre-order MSC kits from an improved version (2.0) which is expected to arrive at the turn of the month October-November. Individual bottle sets and an upgrade kit are also available to pre-order!
Have a look at:
https://www.mscstockholm.com/home-en/webshop.html

For those of you who do not know what the MSC method is about, feel free to check it out:
https://www.mscstockholm.com/home-en/msc-principles/

Below are a couple of detailed and richly illustrated descriptions of how to cast a ring and a heel ring with the MSC method, which you can check out and download if you want!

Nu är det möjligt att förbeställa MSC kit från en förbättrad version (2.0) som beräknas komma i månadsskiftet oktober- n...
03/10/2021

Nu är det möjligt att förbeställa MSC kit från en förbättrad version (2.0) som beräknas komma i månadsskiftet oktober- november. Även enskilda flaskset och ett uppgraderingskit finns att förbeställa!
Kolla på:
https://www.mscstockholm.com/hem/webshop.html
För er som inte vet vad MSC metoden går ut på, kolla gärna på
https://www.mscstockholm.com/hem/mscgrunderna/

Visar en kort video på MSC metodens principer, samt några skissade exempel på MSC gjutningar. MSC delarna som ingår i startkiten visas också och beskrivs. Shows a short video on the principles of the MSC method, as well as some sketched examples of MSC castings. The MSC parts included in the st...

26/09/2021

Here is an animation how to make a sand mold for a heel ring, using the MSC method
(https://www.mscstockholm.com/)

It was made with the CAD program Fusion360

Now the new generation of MSC kits is on it's the way (MSC 2.0)!The usefulness of the MSC method is starting to spread i...
22/09/2021

Now the new generation of MSC kits is on it's the way (MSC 2.0)!

The usefulness of the MSC method is starting to spread in Sweden and also in other countries.

With MSC you can sand cast many models that do not work with traditional 'cope-drag' casting, e.g. rings with patterns along the entire outside, heel rings with patterns on the heel and along the outside of the ring, twisted models, etc.
You have the opportunity to pre-order 3 types of MSC 2.0 kits!

Feel free to check out
https://www.mscstockholm.com/home-en/msc-principles/
for more info about MSC 2.0 and how to pre-order!

Du är den nya generationen av MSC kit på väg (MSC 2.0)!Användbarheten av MSC metoden börjar sprida dig i Sverige och äve...
22/09/2021

Du är den nya generationen av MSC kit på väg (MSC 2.0)!

Användbarheten av MSC metoden börjar sprida dig i Sverige och även i andra länder.

Med MSC kan du sandgjuta många modeller som inte går med traditionell 'botten-lock' gjutning, t.ex. ringar med mönster längs hela utsidan, klackringar med mönster på klacken och längs utsidan av ringen, vridna modeller, etc.

Du har du möligheten att förbeställa 3 typer av MSC 2.0 kit!
Kolla gärna på

https://www.mscstockholm.com/hem/mscgrunderna/

för mer info om MSC 2.0 och hur du förbeställer!

Hejsan,Peter ZilverZmen och jag har just bestämt oss för att ha en helgkurs i MSC gjutning den 29-30 Januari-22 i Peters...
06/09/2021

Hejsan,
Peter ZilverZmen och jag har just bestämt oss för att ha en helgkurs i MSC gjutning den 29-30 Januari-22 i Peters ateljé i Örebro. Se: https://www.mscstockholm.com/hem/kurser/
Välkomna!!

Visar några introduktionskurser i sandgjutning med MSC metoden

Adress

Folkungagatan 126
Stockholm
11630

Aviseringar

Var den första att veta och låt oss skicka ett mail när MSC Stockholm AB postar nyheter och kampanjer. Din e-postadress kommer inte att användas för något annat ändamål, och du kan när som helst avbryta prenumerationen.

Kontakta Affären

Skicka ett meddelande till MSC Stockholm AB:

Dela